repeatability

share

Examples
repeatability's examples

  • A typical application for this kinematic design would be to facilitate accurate repeatability in a multiple pallet system for photolithography. Developing an economically successful system of this type requires an open-minded acceptance of some unique ideas. — “Kinematic Coupling Design for "Z" Axis Repeatability”,
  • Definition of repeatability in the Medical Dictionary. repeatability explanation. Information about repeatability in Free online English dictionary. What is repeatability? Meaning of repeatability medical term. What does repeatability mean?. — “repeatability - definition of repeatability in the Medical”, medical-
  • The repeatability quantifies the basic precision for the gauge. A repeatability standard deviation from J repetitions is not a reliable estimate of the precision of the gauge. — “2.4.4.1. ***ysis of repeatability”, itl.nist.gov
  • E691 -09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method , precision, repeatability, reproducibility, repeatability limit, reproducibility limit, Interlaboratory testing, Precision,. — “ASTM E691 -09 Standard Practice for Conducting an”,
  • Repeatability - Repeatability is defined as the range of positions attained when the Uni-directional repeatability is measured by approaching the point from one direction,. — “Aerotech| Engineering Reference Resolution vs Accuracy”,
  • Definition of repeatability from Webster's New World College Dictionary. Meaning of repeatability. Pronunciation of repeatability. Definition of the word repeatability. Origin of the word repeatability. — “repeatability - Definition of repeatability at ”,
  • 0.04mm repeatability. | Features | | Robot Specs | | Controller Specs | | Dimensions 0.25mm repeatability. | Features | | Robot Specs | | Orca Robot NT Sotware | HP ORCA. — “mitsubishi movemaster melfa robot sale”,
  • repeatability ( ri′pēdə′bilədē ) ( control systems ) The ability of a robot to reposition itself at a location to which it is directed or at which it. — “Repeatability: Definition from ”,
  • Defects and faults are virtually the same. One leads to the other. For instance, a digital IC-output pin that doesn't toggle correctly is a defect that results in a fault. Printed Circuit Board Assembly Reliability and Repeatability. — “PCB Reliability and Repeatability - Nexlogic”,
  • The Four Factors Controlling Repeatability with ASTM 5470 Testing: Tester measurement repeatability: Although this is not a specified parameter for the ***ysis Tech TIM Tester 1300, it is. — “***ysis Tech Thermal Interface Material Testers - Thermal”, ***
  • Repeatability is the variability of the measurements obtained by one person while The ANOVA method quantifies the interaction between repeatability and. — “Repeatability and Reproducibility”,
  • There is an international standard, ISO 5725-2, basic method for determination of repeatability and reproducibility of standard measurement method, and is dealing with interlaboratory experiments performed in order to obtain two measures of precision, repeatability and reproducibility. — “Calculation of Repeatability and Reproducibility for ....doc.doc”, bm.nsysu.edu.tw
  • The measurement accuracy and repeatability is determined. by summing the error components in the system's error budgets. accuracy and repeatability error budgets, review the definitions of. — “Chapter 15 - Accuracy and Repeatability”,
  • We found 12 dictionaries with English definitions that include the word repeatability: the first link on a line below to go directly to a page where "repeatability" is defined. — “Definitions of repeatability - OneLook Dictionary Search”,
  • Definition of repeatability in the Legal Dictionary - by Free online English dictionary and encyclopedia. What is repeatability? Meaning of repeatability as a legal term. What does repeatability mean in law?. — “repeatability legal definition of repeatability”, legal-
  • The repeatability coefficient is a precision measure which represents the value below which the absolute difference between two repeated test results may be expected to lie with a probability of 95%. The standard deviation under repeatability conditions is part of precision and accuracy. — “Repeatability - Wikipedia, the free encyclopedia”,
  • We can calculate a statistic known as R&R, representing the amount of variation associated with Repeatability and Reproducibility. Since Repeatability is synonymous with Equipment variation, our logical focus would be those causes of measurement variation that are inherent to. — “Repeatability ***ysis”,
  • A high speed, high precision, high repeatability serial sectioning device and method for 3-D reconstruction a high-precision, high speed and high repeatability motorized metallographic polishing unit, said polishing unit generating selected serial. — “High speed and repeatability serial ... - Google Patent Search”,
  • Demystifying Repeatability. It is well known to the passive component qualification industry that the performance of any environmental test system is directly related to Repeatability is a specification that is commonly applied to switches. — “Environmental Test System Stability: Demystifying Repeatability”,
  • Read suggestion for improving the repeatability of any dynamometer installation or test session. If you haven't done it recently, give your system a repeatability checkup. — “Repeatability”, land-and-
  • Repeatability ***ysis. The key to successful 4D is repeatability. In earlier 4D surveys a significant proportion of errors were attributed to the difficulty of repeating the original acquisition. Factors including geometry changes, weather, tides, etc. all contribute to this error. — “Repeatability ***ysis - 4D Surveys | ION Geophysical”,
  • The term repeatability is used even though it is not possible to ensure that the same test material is used. In a test of repeatability, the results are obtained independently by. — “Oilfield Glossary: Term 'repeatability'”,
  • The presence of contamination and the abrasion of needle are the factors limiting the repeatability of this method. We can perform a gage repeatability and reproducibility exercise, also known as a Gage R&R (GR&R). — “R - Repeatability”,

Videos
related videos for repeatability

  • Supermodified : Speed and Repeatability Test Servo : BlueBird BMS-661MG+HS with a Supermodified™ V2 Alim : 2s lipo battery (7.4v) This combo is insanely fast (and I have not adjusted the PID coeffs yet!), with great repeatability, a huge amount of torque, true 360° operation... I LOVE it! Supermodified™ : 01
  • SSRP 2010: Observing Fish Behavioral Consistence and Repeatability Student and faculty researchers at OWU are looking at the behavior of the threespined stickleback fish to determine levels of consistence and repeatability. A secondary goal of this Summer Science Research Program project is to understand the relationship between consistency and repeatability at behavioral and statistical levels... Project Title: "Repeatability and Consistency in Stickleback Fish"
  • Scan - Grave - Repeatability www.okm- When a scan is taken and repeated, the user should be able to repeat the results on a real target. Real targets don't move and can be repeated whereas mineralization and false targets will move and/or disappear.
  • repeatability.wmv A serie of 3 videos demonstrating the high reliability of the Kollmorgen DDR positionning repeatability. Video 3 of 3, well the video talks for itself.
  • NASA | Repeatability Why do engineers need to test things over and over and over again? Find out in this video made for students by BEST (Beginning Engineering, Science, and Technology). Want more? Subscribe to NASA on iTunes! Or get tweeted by NASA:
  • JLW T1 CNC milling machine repeatability and backlash test test with mach3, backlash set at 0.004mm, repeat the X axis in 5mm to 0mm for 10 times, meausre between 0.001mm-0.003mm error.
  • DEK Horizon SMT Screen Printer Accuracy & Repeatability Testing. 4 This video is of a DEK Horizon during the "REPRINT" test portion, that is one aspect of our test strategies used in evaluating the machine capability and performance before shipping the machine to our Customers. This test combined with several others quantifies and provides the confidence level required. In this reprint test, the PCB is printed and removed from the output conveyor track and transported back to the input track for reprint without any intervention. The machines vision and positioning systems along with the board support strategy must all be at optimal performance levels or the solder deposits will exhibit rapid deterioration accordingly. Clearly, there are a host of other factors that contribute to the results of this test. However, we address them at prior stages of processing to achieve characteristic performance for the model tested. You may notice a couple of deposits/ pads became smeared after a few prints. If you watch carefully, you will also see the person/cause transporting the PCB back to the input conveyor smear them with his thumb. The hazards of handling wet boards. Of interest to some, is our use of common copier paper mounted to the sub straight in testing and videos. This provides good contrasting, aiding inspection methods and reduces sub straight influence on results. We began using this method in the early years of solder printing to aid process setup and verification, in addition to eliminating the need to remove solder deposits and ...
  • Cnc calibration checking repeatability with dial indicator How I check repeatability, and step calibration. notice the dial reading of zero at every stop even after full speed rapid moves. each full turn of the dial is 1mm so this machine is repeating to less than 0.01mm . pretty accurate for a belt driven gantry router!
  • 5.31.10 LEAD ON RED_0001.wmv NEW SCOPE MOUNT MADE BY LEAD ON RED.GO TO FOR MORE INFORMATION.
  • Fanuc S430iW - Repeatability Test This Fanuc S 430i W is being tested for its repeatability. The magnetic gripper is maneuvering a metal plate around. This robot is commonly used for material handling, but can be used for many other applications such as spot welding, part transfer, palletizing, material removing and many more. For more information on this robot contact RobotWorx at 740-383-8383.
  • Simics repeatability, variability, and determinism Showing how Wind River Simics provides repeatability for any program - even a multithreaded race-condition-rife program running on a multicore system. It also uses Simics reverse execution to back up and repeat the execution of the target system. For more information, see
  • Mel-8704 Repeatability Test A repeatability test was performed using the Mel-8704 EMF Meter and an ordinary, portable home humidifier which was turned On /Off several times at a detection distance of 30". At this distance,the EMF value was measured at 24 mGauss.
  • AGRO EQUIPMENT "VRS NOW" REPEATABILITY TEST Created on February 8, 2011 , 1st tractor in Texas running on Trimble VRS NOW Network. New Holland T7060 AutoCommand. Uvalde, Tx
  • Scorbot ER-III Demonstration and Repeatability Test Test of different motors of the Scorbot ER3. The demonstration also shows the repeatability of the robot. The controller serial number can also be seen. The ER-III is a great device for understanding the fundamentals of robotics, implementing your control algorithms or just showing off to your friends!!!
  • boxford-tcl125servo-repeatability.MP4 boxford tcl 125 retrofitted with mitsubishi mr-j2s servo drives and hc-kfs-053 motors. pretty accurate now!
  • Compact Fanuc LR Mate 200i Arm - Repeatability Testing Designed for maximum flexibility in a compact design, the Fanuc LR Mate 200i is a table top robot capable of applications such as handling, material removal, dispensing, and part transfer.
  • RAD Torque Wrench Accuracy & Repeatability Demo This video demonstrates the accuracy of +/- 5% and repeatability of +/- 2% of the RAD Pneumatic Torque Wrench - - the most accurate torque wrench available on the market.
  • Practical Treatise: 66 Day Repeatability Study {Part 1} PT Doctorate Begins July 30th 2007 10 weeks
  • Fanuc robot accuracy/repeatability test This video shows a brief accuracy/repeatability test by probing the tip of a Starrett 0.001" dial indicator. The robot used in the video is a Fanuc ArcMate100i (aka. Fanuc M6i) which have a reach of approximately 4.5 feet (1.3 meters). Each number on the indicator denotes 0.001" (0.025-mm). The indicator's small tick marks represent 0.0001" (0.0025-mm). This is by no means a scientific test, but it does show a ballpark of how accurate these robots can position their tool center point during critical moves.
  • Motoman SK45 Industrial Robot Repeatability Testing Motoman SK45 robots have 6 axes and a payload of 45kg making this robot perfect for a variety of welding and handling applications. RobotWorx runs all of their robots through repeatability testing before reselling them. For more information on any Motoman Robots, including the SK45, contact RobotWorx at 740-383-8383!
  • Repeatability This video is about repeatability in science. http genesismission.4 http
  • 47: Cnc Mini Mill Repeatability Test 4 This is a multiple repeatability test also running the test run from home limits
  • CNC router repeatability test Checking repeatability of my newly router. X axis travel 550mm - forward/return. Returns to zero on dial indicator. :)
  • X3 cnc accuracy and repeatability test with 0.030 inch drill bit Drilling 0.125 inch deep holes with a 0.030 inch bit over 6 inch range in X and 1 inch range in Y on a 6061 aluminum over previously drilled starter holes. Then the program is run again with the spindle stopped and the bit is lowered into each hole to test for accuracy and repeatability. Feed rate for all 3 axis is 3 inch/min, spindle speed is approx 900 RPM. The bit did not break and the results were great.
  • Articulated Robot 6x by Servo Vision Articulate Robot 6 Axes Version TR3 - See more....
  • Adjustable Guiderail Repeatability This video shows the high level of repeatability provided by our Pathfinder brand of automatic adjustable guiderail.
  • Tests with a Renishaw XL80 laser interferometer - Accuracy & Repeatability Accuracy & Repeatability tests are done to an ABB IRB 1600. The test was performed for the paper "Assessment of the Positioning Performance of an Industrial Robot" by Mohamed Slamani, Albert Nubiola and Ilian Bonev at the Control and Robotics Lab at the ÉTS, Montreal. coro.etsmtl.ca
  • Panther-210 CNC Router Engraver Machine Repeatability test Panther-210 CNC Router ENGRAVER-mill Engraver Machine PCB's Engraving Repeatability test.
  • Comparing Focus Repeatability of the Sigma 17-35mm Len.wmv I Bought this Sigma lens from ebay on November 2, 2010, from boycst22, This video shows the focussing issue that i am having with the lens. I compared it with both the tamron wide angle and canon 17-40L
  • 1982 Chevrolet Citation (35 Mp/h) NHTSA Frontal Impact (Repeatability Research - Test #1) The goal of test #1 (Shown) and #2 is to see if there is a difference in results between crash test centers. The shown test center is TRC Ohio. (Indoor Facility) Dummy Information: Driver-Passenger HIC 954-950 Chest G's 53-39 Femur Loads L/R 304/552-397/520 There were 23 inches of static crush.
  • TCF-S3 repeatability demonstration Optec's TCF-S3 3-inch temperature compensating focuser is shown lifting nearly 17 lbs with repeatability better than 1/1000th inch.
  • iARM V + TRICeps3D5x : Screw-Unscrew and task-repeatability operations iARM V and TRICeps3D5x has been developed in IIT Bombay, Mumbai, INDIA by ThinkLABS. This video shows how iARM V can perform "Screw-Unscrew" and "task-repeatability" operations with the software TRICeps3D5x. This combination has been designed keeping robotic education in mind and not industrial applications. The software has been designed by Rahul Deo Kinematic ***ysis (earlier) performed by Saurabh Palan and (now by) Dadasaheb Karad. Firmware has been developed by Anand Ramaswami. And funded by Mr. Gagan Goyal (ThinkLABS).
  • JLW T1x Home switch repeatability test use the mach 3 reference home ( green light ) to check the home repeatiblity error
  • Home Switch Repeatability testing home switch repeatability
  • QuikSigma Gauge Repeatability and Reproducibility Part 2 How to evaluate a measurement system using the GR&R tool in QuikSigma
  • QuikSigma Gauge Repeatability and Reproducibility Part 1 How to evaluate a measurement system using the GR&R tool in QuikSigma
  • Fast, consistent, and repeatable application environments in the cloud. Is the flexibility and agility of your business inhibited by the time that it takes you to build and deploy application environments? Maybe you struggle to produce consistent environments as you move them from development to test to production? Learn how you can address these issues and more by leveraging Platform as a Service solutions within your enterprise. Specifically, learn how the Open Virtualization Format (OVF) standard for virtual images can be harnessed to produce a patterns-based approach to building, deploying, and managing your application environments. This approach delivers the speed, repeatability, and consistency currently lacking in many enterprise application environments and can transform the management of your application environments into a competitive advantage for your business.
  • Motoman SK6 Robot - Repeatability Test This Motoman SK6 is performing a repeatability test. Repeatability is a very important factor in thinking about buying a robot. RobotWorx runs all reconditioned robots through a 168 point inspection, one point being the repeatability test. For your robot needs call RobotWorx at 740-383-8383.
  • Measuring Accuracy & Repeatability of a FARO ION laser tracker (ADM only) An ABB robot is used to measure the FARO laser tracker accuracy with a 1050.688 mm INVAR bar. The test was performed in the Control and Robotics Lab at the ÉTS, Montreal. coro.etsmtl.ca
  • ST Robotics R12 Repeatability Test ST Robotics R12 Repeatability Test using an LVDT and the optional ST Robotics I/O Board.
  • Repeatability Testing with Fanuc Robots During the refurbishing process, the robot will go through repeatability testing. During the course of this test, the robot is connected to a computer program that will record tolerances and the specific movements of the robot. Once it is complete, the next step is to program the robot to the customers specifications.
  • X3 cnc accuracy and repeatability test with center drill Center drilling 0.003 inch deep starter holes to test for accuracy and repeatability over 6 inch range in X and 1 inch range in Y on a 6061 aluminum. Feed rate for all 3 axis is 10 inch/min and spindle speed is approx 1000 RPM.

Blogs & Forum
blogs and forums about repeatability

  • “Latest repeatability. DIY Hexapod CNC Robot! Download latest version of Flash to view video!. Download This YouTube Video I Copyright © 2009 by DIY Blog - Privacy - Hosted by SingleHop. Entries (RSS) and Comments (RSS). 39 queries. 0.2010 seconds”
    Repeatability - tag,

  • “Sep 09 2008. Repeatability is NOT the Goal. Posted by: David Gilbert in As I read the blog and the comments after it, a common theme came up. I thought about it”
    — Test Explorations " Repeatability is NOT the Goal,

  • “A Valuable Free Resource to improve your sales and profits through the discovery and use of Authenticity Posted by Andrew Corbus in Repeatability Blog at 09:03 PM. Read the article. A System of Service. There's a chain of specialty”
    — RealitySells | Improve Your Sales and Profits through the,

  • “Blog for the RepRap project at - a project to create The same repeatability test used on the Z-axis (see previous post) was re-used, results”
    — RepRap: Blog: Darwin's Y-axis repeatability,

  • “Ergomo repeatability. Tri Forum Classifieds Lavender Room Jobs The Womens. Print Thread If you're really curious, feel free to read my last three blog entries. The results aren't meant to be taken too literally (n=1,”
    — Slowtwitch Forums: Triathlon Forum: Ergomo repeatability,

  • “3D Printing informational blog State of the art software applications have increased repeatability excellently over the last 10 years in Rapid Prototyping and other manufacturing systems”
    Repeatability of 3D Printer rapid prototype systems, kaiser3

  • “BikeTechReview - your source for independent cycling reviews, tips, and all things aero. Forum. Blog. News. About BTR. Home Blog Repeatability and the San Diego Wind Tunnel. kdublog. miscellaneous observations and musings. Home. Tags. Search. Feed. Oct 17. 2009”
    Repeatability and the San Diego Wind Tunnel,

  • “This informative blog is a location for plastics professionals to The 80-20 Rule For Available Shot Size was the previous entry in this blog”
    — Check Ring Drift vs. Repeatability - Plastics Training,

Similar
similar for repeatability